h-index: 7     i10-index: 5

Volume 3 (2023)
Volume 2 (2022)
Volume 1 (2021)

 

Google Scholar h-index 7
i10-index 5
Citation in Google Scholar 132
WOS Citation 38
Number of Volumes 4
Number of Issues 14
Number of Articles 104
Number of Contributors 166
Article View 28,679
PDF Download 14,246
View Per Article 275.76
PDF Download Per Article 136.98
-----------------------------------------
Number of Submissions 133
Rejected Submissions 33
Rejection Rate 25
Accepted Submissions 85
Acceptance Rate 64
Time to Accept (Days) 30
Number of Indexing Databases 5
Number of Reviewers 108

Eurasian Journal of Science and Technology (Eurasian J. Sci. Technol.)

DOI Prefix assigned for Sami Publishing Company (mEDRA): 10.48309

DOI: 10.48309/EJST

Eurasian Journal of Science and Technology (EJST) was published by Sami Publishing Company (SPC)  in 2021 with cooperation "Iranian Chemical Science and Technologies Association". This double blind peer-reviewed and indexed journal aim to provide a platform for researchers around the world to share their latest findings  in all field of Science and Technology.  The journal is Open Access with article free of charges and all articles published in this journal are freely available for readers online at http://ejst.samipubco.com/ without a subscription and authors retain the copyright of their work. All costs of this journal are covered by Sami Publishing Company (SPC). All submitted manuscripts are checked for similarity through a trustworthy software named iThenticate to be assured about their originality and then rigorously double blind peer-reviewed by international reviewers.

Eurasian Journal of Science and Technology is published Quarterly (online).

Eurasian J. Sci. Technol. is supported by:

  1. Sami Publishing Company (SPC)
  2. Iranian Chemical Science and Technologies Association
Original Research Article Basic Medicine
Isolation and Characterization of Oil Obtained from Leucaena leucocephala (Lam.) De Wit

Jaya B Puri; AbdulBasit M.A. Shaikh; Umesh Pravin Dhuldhaj

Volume 4, Issue 2 , April 2024, Pages 57-65

https://doi.org/10.48309/ejst.2024.418888.1100

Abstract
  In the present study, we have collected the leucocephala seeds which are seasonal and having good amount of oil content. The oil seeds can be used as the one of the adulterant for the coffee. The whole plant having importance for human being, it could be as the food or furniture. The immature seeds, ...  Read More

Original Research Article Basic Medicine
Investigating the Effect of Diabetes on the Incidence of Carpal Tunnel Syndrome

Mohammad Irajian; Seyed Hamed Ghaffari

Volume 4, Issue 2 , April 2024, Pages 66-75

https://doi.org/10.48309/ejst.2024.418588.1096

Abstract
  Introduction: Carpal Tunnel Syndrome (CTS) has garnered attention in previous research for its potential association with diabetes mellitus. It has been suggested that CTS may occur more frequently in individuals with diabetes, and this connection might be influenced by factors such as the duration of ...  Read More

Original Research Article Chemistry
Evaluation of the Potential Health Effects Resulting from Radon Exposure via Groundwater in Keffi, Nigeria

Blessing Ifeyinwa Tabugbo; Rilwan Usman; Mikaila Abdullahi; Jackso Karniliyus

Volume 4, Issue 2 , April 2024, Pages 76-87

https://doi.org/10.48309/ejst.2024.423473.1106

Abstract
  In Nasarawa State, groundwater is the most often used source of fresh water for daily consumption, but its quality still remains a serious concern due to rising concentrations of radon resulting from activities of mining. This study evaluated the potential pose resulting from radon exposure via groundwater ...  Read More

Review Article Basic Medicine
Integration of Artificial Intelligence in Nanomedicine

Merit Oluchi Ori; Francis-Dominic Makong Ekpan; Humphrey Sam Samuel; Odii Peter Egwuatu

Volume 4, Issue 2 , April 2024, Pages 88-104

https://doi.org/10.48309/ejst.2024.422419.1105

Abstract
  The integration of artificial intelligence (AI) and nanotechnology has revolutionized the field of nanomedicine. AI’s large-scale data processing and pattern recognition capabilities can enhance the design of nanotechnologies for diagnosis and therapy. This integration can address challenges in ...  Read More

Original Research Article Chemistry
Adsorption Monitoring of Triflouroaceticacid, Pentadecyl Ester and Pentadecanoic Acid, 14-Methyl-, Methyl Ester on Fe (110): using DFT and Molecular Simulation

Abdullahi Muhammad Ayuba; Thomas Aondofa Nyijime; Safiyya Abubakar Minjibir; Fater Iorhuna

Volume 4, Issue 2 , April 2024, Pages 105-116

https://doi.org/10.48309/ejst.2024.423518.1108

Abstract
  Quantum functions were used to assess a theoretical investigation on mild steel's resistance to corrosion. To determine the stable geometry of the investigated compounds, TPE and PME, local density function B3LYP was optimized and simulated using DFT under restricted spin polarization DNP basis. The ...  Read More

Review Article Chemistry
Revisiting on Applications of Industrial Filters in Enhancing Polymer Product Quality and Performance

Merit Oluchi Ori; Edet Patience Ime; Francis-dominic Makong Ekpan; Humphrey Sam Samuel; Odii Peter Egwuatu; Ede Joseph Ajor

Volume 4, Issue 2 , April 2024, Pages 116-132

https://doi.org/10.48309/ejst.2024.423429.1107

Abstract
  Industrial filters are important components in the manufacturing and processing of polymer products. They are used to remove impurities, contaminants, and foreign particles from polymer materials, ensuring high-quality and consistent products. The polymer industry, which is at the centre of contemporary ...  Read More

Review Article Chemistry
Unleashing the Potential of Machine Learning in Chalcogen Bonding Research

Humphrey Sam Samuel; Ugo Nweke-Maraizu; Emmanuel Edet Etim Etim

Volume 4, Issue 2 , April 2024, Pages 133-164

https://doi.org/10.48309/EJST.2024.416374.1091

Abstract
  Chalcogen bonding, a non-covalent interaction involving chalcogen atoms (e.g., sulfur, selenium, and tellurium), plays a crucial role in various chemical and biological processes. Understanding and characterizing chalcogen bonding interactions are essential for designing novel materials, medications, ...  Read More

Engineering
Manufacture of Modified Protective Coating Derived from Coal Industry

Amin Ahmadpour; Alireza Bozorgian

Volume 1, Issue 1 , April 2021, , Pages 28-36

https://doi.org/10.48309/ejst.2021.284979.1013

Abstract
  In this work, coal residue (pitch) was used to produce an inexpensive protective coating. The residue is primarily rehabitated for just to be suitable for use as a coating material (reference coat) by dissolving it in benzene in a ratio of Pitch/Solvent (P/S) = 3:1 by weight. The reference coating was ...  Read More

Manufacture of Modified Protective Coating Derived from Coal Industry


Engineering
Adaptive Control of Network Frequency by Doubly-Fed Induction Generators Using a Data-Driven Method

Ebadollah Amouzad Mahdiraji; Mojtaba Sedghi Amiri

Volume 1, Issue 2 , May 2021, , Pages 86-102

https://doi.org/10.48309/ejst.2021.130260

Abstract
  Nowadays, to involve wind turbines in controlling the network frequency, drop and inertia control methods are usually used for variable speed wind turbines. Adjusting the benefits of droop and inertia control loops is very effective on the performance of wind turbines, but due to the variability of wind ...  Read More

Adaptive Control of Network Frequency by Doubly-Fed Induction Generators Using a Data-Driven Method


Engineering
Evaluation of Corona Charge Positive and Negative Impulses on Polymeric Surfaces and Simulation of Impact Rate

Ebadollah Amouzad Mahdiraji

Volume 1, Issue 4 , August 2021, , Pages 234-241

https://doi.org/10.48309/EJST.2021.289237.1038

Abstract
  Corona electric discharge phenomenon occurs when the electric field intensity exceeds the corona threshold. In the analysis of this paper, three types of hypotheses of partial charge (electrons, positive ions, negative ions) generated in the air due to corona electrical discharge are considered. The ...  Read More

Evaluation of Corona Charge Positive and Negative Impulses on Polymeric Surfaces and Simulation of Impact Rate


Engineering
Effects of Establishing Occupational Health and Safety Management Standards and Environmental Management on Environmental Factors and Employee Satisfaction

Ebadollah Amouzad Mahdiraji; Reza Kolbadinezhad

Volume 1, Issue 3 , June 2021, , Pages 142-149

https://doi.org/10.48309/EJST.2021.285451.1022

Abstract
  This study aimed to investigate the status of the establishment of occupational safety and health management system and environmental management system on environmental factors and employee satisfaction. This paper was a quasi-experimental study of before and after type that was conducted in 2012 in ...  Read More

Effects of Establishing Occupational Health and Safety Management Standards and Environmental Management on Environmental Factors and Employee Satisfaction


Engineering
Inhalation Exposure to Dust Pollution in the Workplace

Reza Kolbadinezhad; Ebadollah Amouzad Mahdiraji

Volume 1, Issue 2 , May 2021, , Pages 72-79

https://doi.org/10.48309/ejst.2021.285211.1018

Abstract
  Exposure to dust in the air is one of the most common environmental hazards in workshops that can have devastating effects on health. In this study, workers' exposure to particles in inhaled air by conventional methods as well as GIS has been investigated. The research was performed cross-sectionally-analytically ...  Read More

Inhalation Exposure to Dust Pollution in the Workplace


Review Article Chemistry
Electrical Applications of Clay-Reinforced Recycled Plastic Composites

Edet Patience Ime; Ede Joseph Ajor; Francis-Dominic Makong Ekpan; Humphrey Sam Samuel; Odii Peter Egwuatu

Articles in Press, Accepted Manuscript, Available Online from 27 January 2024

https://doi.org/10.48309/ejst.2023.423583.1110

Abstract
  The search for eco-friendly and sustainable materials for electrical applications has stepped up recently, spurred on by the demand for effective, greener solutions. To meet these expectations, a promising class of materials known as clay-reinforced recycled plastic composites has evolved. Increased ...  Read More

Review Article Basic Medicine
Emerging Technologies for Eco-Friendly Production of Bioethanol from Lignocellulosic Waste Materials

Francis-Dominic Makong Ekpan; Merit Oluchi Ori; Humphrey Sam Samuel; Odii Peter Egwuatu

Articles in Press, Accepted Manuscript, Available Online from 27 January 2024

https://doi.org/10.48309/ejst.2024.429106.1119

Abstract
  In the face of growing environmental concerns and the need for sustainable energy sources, the production of bioethanol from lignocellulosic waste materials has emerged as a promising solution. This study provides an overview of efforts to enhance the eco-friendly production of bioethanol from lignocellulosic ...  Read More

Original Research Article Basic Medicine
Enhanced Structural, Morphological and Optical Features of Tix MnNiO (X= 1, 2, and 3 mL) Synthesized Using Hydrothermal Approach

Azmat Hussain; Saira Habib; Inam Ullah; Fahma Sahreen; Imtiaz Ahmad; Imosobomeh L Ikhioya

Articles in Press, Accepted Manuscript, Available Online from 28 January 2024

https://doi.org/10.48309/ejst.2024.428429.1117

Abstract
  In this study, a hydrothermal method was used to synthesize Tix MnNiO nanostructures for photovoltaic applications. The synthesized films display a hexagonal phase and are polycrystalline. They exhibit a preferred alignment on the (111), (112), (116), (121), and (200) planes. The angles 2 theta are (26.612, ...  Read More

Review Article Nanosciences
AI-enabled Diagnostics and Monitoring in Nanomedicine

Odii Peter Egwuatu; Merit Oluchi Ori; Humphrey Sam Samuel; Francis-Dominic Makong Ekpan

Articles in Press, Accepted Manuscript, Available Online from 04 February 2024

https://doi.org/10.48309/ejst.2024.426725.1116

Abstract
  This review article explores the transformative impact of AI in the field of nanomedicine, specifically focusing on AI-enabled diagnostics and monitoring. Nanomedicine has emerged as a promising approach for improving medical imaging, drug delivery, diagnostics, and therapy, and AI has become a disruptive ...  Read More

Review Article Chemistry
Asphaltene Structure, Separation and Purification Steps: A Short Review

Chinedu Innocent Okoye; Obiamaka Doris Oboli

Articles in Press, Accepted Manuscript, Available Online from 31 January 2024

https://doi.org/10.48309/ejst.2023.417300.1093

Abstract
  Separation of asphaltenes into multiple sub-fractions is performed using different fractionation techniques which are investigated in this study. The method chosen depends on the parameter of interest such as solubility, molecular weight difference, polarity, etc. For this write-up, the methods reviewed ...  Read More

Original Research Article Physics
Enhanced Solar Cell Efficiency with Tin-Based Lead-Free Material (FASnI3) through SCAPS-1D Modeling

Ateeq ul Rehman; Tahir Munir; Shahbaz Afzal; Muhammad Saleem; Imosobomeh L Ikhioya

Articles in Press, Accepted Manuscript, Available Online from 12 February 2024

https://doi.org/10.48309/ejst.2024.429200.1118

Abstract
  Recent successes in the development of lead (Pb) halide perovskites have urged extensive research into cost-effective photovoltaic devices, to avoid significant challenges related to stability and toxicity. In this study, device modeling was presented for lead (Pb)-free perovskite solar cells (PSC), ...  Read More

Original Research Article Chemistry
Efficacy of Adsorption of Congo Red Dyes From An Aqueous Media Using Silicon Nitride (Si3N4) Adsorbent Derived From Sand and Coffee Husk Wastes

Samuel N. Ndung’u; Ruth N. Wanjau; Esther W. Nthiga

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

https://doi.org/10.48309/ejst.2024.433646.1121

Abstract
  The current study utilizes Silicon Nitride (Si3N4) as a novel adsorbent in evaluating its adsorptive ability for Congo red dyes from an aqueous solution. The adsorbent was prepared using extracted silica from sand and coffee husk biochar in an ammonia environment. The Si3N4 adsorbent was characterized ...  Read More

Keywords Cloud