Electrical Applications of Clay-Reinforced Recycled Plastic Composites

Ime, Edet Patience; Ajor, Ede Joseph; Ekpan, Francis-Dominic Makong; Samuel, Humphrey Sam; Egwuatu, Odii Peter

doi:10.48309/ejst.2024.423583.1110

Articles in Press

Document Type : Review Article

Authors

¹ Department of Chemistry Education Federal College of Education Obudu, Nigeria

² Department of Bio Technology Federal University of Technology Owerri, Nigeria

³ Department of Chemical Sciences, Federal University Wukari, Taraba State, Nigeria

⁴ Department of Anatomy, Ebonyi State University, Abakaliki, Nigeria

https://doi.org/10.48309/ejst.2024.423583.1110

Abstract

The search for eco-friendly and sustainable materials for electrical applications has stepped up recently, spurred on by the demand for effective, greener solutions. To meet these expectations, a promising class of materials known as clay-reinforced recycled plastic composites has evolved. Increased mechanical strength, less thermal expansion, and higher flame resistance are all benefits of incorporating clay nanoparticles into recycled plastics, which are essential for maintaining the dependability and safety of electrical systems. Clay-reinforced recycled plastic composites have been investigated for usage in various applications, including electrical ones. The waste plastic components, such as polystyrene or high-density polyethylene, are combined with clay, such as montmorillonite, to create the composites using a cold pressing technique. In comparison to the original plastic materials, the resultant composites have better mechanical, thermal, and water absorption characteristics. In addition, it has been shown that adding clay to composites improves their electrical qualities, making them appropriate for use in electrical applications. Dielectric strength, dielectric constant, and electrical conductivity tests have all been used to assess the electrical properties of the composites. According to the findings, clay-reinforced recycled plastic composites could be used in electrical applications, such as the production of electrical insulators. Utilizing these composites can help develop sustainable materials for various applications and reduce plastic waste.

Keywords

Main Subjects

Polymer

OPEN ACCESS

©2024 The author(s). This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit: http://creativecommons.org/licenses/by/4.0/

PUBLISHER NOTE

Sami Publishing Company remains neutral concerning jurisdictional claims in published maps and institutional affiliations.

CURRENT PUBLISHER

Sami Publishing Company

References

[1] Adeniyi A.G., Ighalo J.O., Adeyanju C.A., Materials-to-product potentials for sustainable development in Nigeria, International Journal of Sustainable Engineering, 2021, 14:664 [Crossref], [Google Scholar], [Publisher]

[2] Alam S.M.M., December. PI-clay nanocomposites:Synthesis and characterization. In 2008 International Conference on Electrical and Computer Engineering, 2008, 275 [Crossref], [Google Scholar], [Publisher]

[3] Andričić B., Kovačić T., Klarić I., Properties of recycled material containing poly (vinyl chloride), polypropylene, and calcium carbonate nanofiller, Polymer Engineering & Science, 2008, 48:572 [Crossref], [Google Scholar], [Publisher]

[4] Modesti M., Besco S., Lorenzetti A., Causin V., Marega C., Gilman J.W., Fox D.M., Trulove P.C., De Long H.C., Zammarano M., ABS/clay nanocomposites obtained by a solution technique:Influence of clay organic modifiers, Polymer Degradation and stability, 2007, 92:2206 [Crossref], [Google Scholar], [Publisher]

[5] Mohana Krishnudu D., Sreeramulu D., Reddy, P.V., Rajendra Prasad P., Influence of filler on mechanical and di-electric properties of coir and luffa cylindrica fiber reinforced epoxy hybrid composites, Journal of Natural Fibers, 2022, 19:339 [Crossref], [Google Scholar], [Publisher]

[6] Drzal L.T., Natural fibers, biopolymers, and biocomposites. CRC press, 2005 [Google Scholar], [Publisher]

[7] Dousti M., Firoozfar A. 'Compacted Kerman Clay Liner, Different Permeants and Different Additives', Journal of Engineering in Industrial Research, 2022, 3: 54. [Crossref], [Google Scholar], [Publisher]

[8] Otokunefor E., Azi S. 'A Float Zone Furnace Using Ellipsoidal Flood Light Reflectors', Journal of Engineering in Industrial Research,2023, 4:109 [Crossref], [Google Scholar], [Publisher]
[9] Emelu V.O., Emelu C., Babatunde B.B., Wali E., Afolabi O.O., Corrosion Control (Cathodic Protection) on Pipelines in Port Harcourt, Nigeria:A Quantitative Approach, Journal of Engineering in Industrial Research, 2023, 4:22 [Crossref], [Google Scholar], [Publisher]

[10] Hussain M.A., Shuai Z., Moawwez M.A., Umar T., Iqbal M.R., Kamran M., Muneer M., A Review of Spatial Variations of Multiple Natural Hazards and Risk Management Strategies in Pakistan, Water, 2023, 15:407 [Crossref], [Google Scholar], [Publisher]

[11] Pandey J.K., Singh R.P., Green nanocomposites from renewable resources:effect of plasticizer on the structure and material properties of clay‐filled starch, Starch‐Stärke, 2005, 57:8 [Crossref], [Google Scholar], [Publisher]

[12] Awad W.H., Beyer G., Benderly D., Ijdo W.L., Songtipya P., del Mar Jimenez-Gasco M., Manias E., Wilkie C.A., Material properties of nanoclay PVC composites. Polymer, 2009, 50:1857 [Crossref], [Google Scholar], [Publisher]

[13] Sheshmani S., Ashori A., Hamzeh Y., Physical properties of polyethylene–wood fiber–clay nanocomposites, Journal of applied polymer science, 2010, 118:3255 [Crossref], [Google Scholar], [Publisher]

[14] Tanniru M., Yuan Q., Misra R.D.K., On significant retention of impact strength in clay–reinforced high-density polyethylene (HDPE) nanocomposites, Polymer, 2006, 47:2133 [Crossref], [Google Scholar], [Publisher]

[15] Tanniru M., Yuan Q., Misra R.D.K., On significant retention of impact strength in clay–reinforced high-density polyethylene (HDPE) nanocomposites, Polymer, 2006, 47:2133 [Crossref], [Google Scholar], [Publisher]

[16] Belioka M.P., Markozanne G., Chrissopoulou K., Achilias D.S., Advanced Plastic Waste Recycling—The Effect of Clay on the Morphological and Thermal Behavior of Recycled PET/PLA Sustainable Blends. Polymers, 2023, 15:3145 [Crossref], [Google Scholar], [Publisher]

[17] Abdulkareem S.A., Adeniyi A.G., Preparation and evaluation of electrical properties of plastic composites developed from recycled polystyrene and local clay, Nigerian Journal of Technological Development, 2018, 15:98 [Crossref], [Google Scholar], [Publisher]

[18] Elloumi A., Pimbert S., Bourmaud A., Bradai C., Thermomechanical properties of virgin and recycled polypropylene impact copolymer/CaCO₃ nanocomposites, Polymer Engineering & Science, 2010, 50:1904 [Crossref], [Google Scholar], [Publisher]

[19] Fatuyi O.A., samuel S.A., Characterization of the physio-chemical properties of kaolinite clay bodies of Akerebiata, Ilorin and Ikere Ekiti, nigeria. Material & Metallurgical Engineering, 2018, 1 [Google Scholar]

[20] Ighalo J.O., Adeniyi A.G., Utilization of recycled polystyrene and aluminum wastes in the development of conductive plastic composites:evaluation of electrical properties, Handbook of environmental materials management, 2020, 1 [Crossref], [Google Scholar], [Publisher]

[21] Istrate O.M., Chen B., Structure and properties of clay/recycled plastic composites, Applied Clay Science, 2018, 156:144 [Crossref], [Google Scholar], [Publisher]

[22] Pandey S., Zaidib M.G.H., Gururani S.K., Recent developments in clay-polymer nano composites, Scientific Journal of Review, 2013, 2:296 [Crossref], [Google Scholar], [Publisher]

[23] Abdulkareem S.A., Adeniyi A.G., Tensile and water absorbing properties of natural fibre reinforced plastic composites from waste polystyrene and rice husk, ABUAD Journal of Engineering Research and Development, 2018, 1:199[Google Scholar], [Publisher]

[24] Adeniyi A.G., Onifade D.V., Ighalo J.O. Adeoye A.S., A review of coir fiber reinforced polymer composites, Composites Part B:Engineering, 2019, 176:107305 [Crossref], [Google Scholar], [Publisher]

[25] Dittenber D.B., GangaRao H.V., Critical review of recent publications on use of natural composites in infrastructure, Composites Part A:applied science and manufacturing, 2012, 43:1419 [Crossref], [Google Scholar], [Publisher]

[26] Theng B.K.G., Formation and properties of clay-polymer complexes, Elsevier,2012 [Google Scholar], [Publisher]

[27] Turku I., Keskisaari A., Kärki T., Puurtinen A., Marttila P., Characterization of wood plastic composites manufactured from recycled plastic blends, Composite Structures, 2017, 161:469 [Crossref], [Google Scholar], [Publisher]

[28] Wang Y., Conductive thermoplastic composite blends for flow field plates for use in polymer electrolyte membrane fuel cells (PEMFC) (Master's thesis, University of Waterloo), 2006 [Crossref], [Google Scholar], [Publisher]

[29] Samuel H.S., Etim E.E., Shinggu J.P., Bako B., Machine learning of Rotational spectra analysis in interstellar medium, Communication in Physical Sciences, 2023, 10 [Crossref], [Google Scholar], [Publisher]

[30] Kelnar I., Sukhanov V., Rotrekl J., Kaprálková L., Toughening of recycled poly (ethylene terephthalate) with clay‐compatibilized rubber phase, Journal of applied polymer science, 2010, 116:3621 [Crossref], [Google Scholar], [Publisher]

[31] Lei Y., Wu Q., Clemons C.M., Preparation and properties of recycled HDPE/clay hybrids, Journal of Applied Polymer Science, 2007, 103:3056 [Crossref], [Google Scholar], [Publisher]

[32] Lei Y., Wu Q., Clemons C.M., Yao F., Xu, Y., Influence of nanoclay on properties of HDPE/wood composites, Journal of applied polymer science, 2007, 106:3958 [Crossref], [Google Scholar], [Publisher]

[33] Samuel H.S., Etim E.E., Shinggu J.P., Bako B., Machine learning of Rotational spectra analysis in interstellar medium, Communication in Physical Sciences, 2023, 10 [Google Scholar], [Publisher]

[34] Zeng C., Lee L.J., Poly (methyl methacrylate) and polystyrene/clay nanocomposites prepared by in-situ polymerization, Macromolecules, 2001, 34:4098 [Crossref], [Google Scholar], [Publisher]

[35] Zeng Q.H., Yu A.B., Lu G.Q., Paul D.R., Clay-based polymer nanocomposites:research and commercial development, Journal of nanoscience and nanotechnology, 2005, 5:1574 [Crossref], [Google Scholar], [Publisher]

[36] Shirvanimoghaddam K., Balaji K.V., Ahmadi M., Nazarloo H.A., Yadav R., Zabihi O., Egan B., Adetunji P., Naebe M., Strategies to resolve intrinsic conflicts between strength and toughness in polyethylene composites, Advanced Industrial and Engineering Polymer Research, 2023 [Crossref], [Google Scholar], [Publisher]

[37] Rahman M.R., Bakri M.K.B., Matin M.M., Khui P.L.N., Micro and nano effects of recycled plastic waste to reinforce and enhance in biocomposites. In Recycled Plastic Biocomposites, Woodhead Publishing, 2022, 195 [Crossref], [Google Scholar], [Publisher]

[38] Santos A.J., Pina L.T., Galvao J.G., Trindade G.G., Nunes R.K., Santos J.S., Santos C.P., Gonsalves J.K.M., Lira A.A.M., Cavalcanti S.C., Santos R.L., Clay/PVP nanocomposites enriched with Syzygium aromaticum essential oil as a safe formulation against Aedes aegypti larvae, Applied Clay Science, 2020, 185:105394 [Crossref], [Google Scholar], [Publisher]

[39] Velásquez E.J., Garrido L., Guarda A., Galotto M.J., De Dicastillo C.L., Increasing the incorporation of recycled PET on polymeric blends through the reinforcement with commercial nanoclays, Applied Clay Science, 2019, 180:105185 [Crossref], [Google Scholar], [Publisher]

[40] Kracalik M., Recycled clay/PET nanocomposites evaluated by novel rheological analysis approach, Applied Clay Science, 2018, 166:181 [Crossref], [Google Scholar], [Publisher]

[41] Amini Z., Asghari M., Preparation and characterization of ultra-thin poly ether block amide/nanoclay nanocomposite membrane for gas separation, Applied Clay Science, 2018, 166:230 [Crossref], [Google Scholar], [Publisher]

[42] Daraei P., Madaeni S.S., Salehi E., Ghaemi N., Ghari H.S., Khadivi M.A., Rostami E., Novel thin film composite membrane fabricated by mixed matrix nanoclay/chitosan on PVDF microfiltration support:Preparation, characterization and performance in dye removal, Journal of Membrane Science, 2013, 436:97 [Crossref], [Google Scholar], [Publisher]

Eurasian Journal of Science and Technology

Electrical Applications of Clay-Reinforced Recycled Plastic Composites

References

References

Articles in Press, Accepted Manuscript
Available Online from 27 January 2024

Electrical Applications of Clay-Reinforced Recycled Plastic Composites

References

References

Articles in Press, Accepted Manuscript Available Online from 27 January 2024

Articles in Press, Accepted Manuscript
Available Online from 27 January 2024