@article { author = {Yasir, Dheyaa and Ali, Nihad}, title = {Effect of adding different levels of Lemon grass leaves Cymbopogon citratus to the diet and its extract in drinking water on productive performance of broiler Chickens (Ross 308)}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {1-10}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.128538.1003}, abstract = {TThis experiment was conducted at the poultry farm of the college of Agriculture, Al-Qasim Green University for the period from 18/9/2019 to 23/10/2019. The study was aimed to the effect of adding different levels of lemongrass leaves (Cymbopogon citratus) to the diet and its extract to drinking water on Productive performance for broiler chickens (Ross 308). In the experiment, 225 unsexed broiler chicks (Ross), which obtained from Al-Anwar hatchery, it the were randomly distributed on 15 pen, with 5 experimental treatments,45 birds for each treatment. Each treatment included three replicates per 15 birds. The treatments of the experiment were as follows: First treatment: control group free from any addition . The second treatment: a basic feed added to 10 g of lemon grass / kg feed, the third treatment: a basic feed added with 20 g of lemon grass / kg feed, The fourth treatment: adding 100 ml of the aqueous extract of the lemongrass / liter of drinking water, and the fifth treatment: adding 200 ml of the aqueous extract of the lemongrass liter of drinking water. The experiment included studying the following characteristics: average body weight, weight gain, feed consumption, Feed conversion ratio, production index and average water consumption.Significant moral superiority (p≤0.05) for the fourth and fifth treatment (addition of 100 and 200 ml of aqueous extract of lemon grass / liter of drinking water) in the body weight of the body in the fifth week}, keywords = {lemon grass,Cymbopogon citratus,productive performance,broiler}, url = {https://ejst.samipubco.com/article_129952.html}, eprint = {https://ejst.samipubco.com/article_129952_0bbca263e34d654e8c21f50036687e32.pdf} } @article { author = {Sedghi Amiri, Mojtaba and Amouzad Mahdiraji, Ebadollah}, title = {Effects of Fourier Transform and Modal Theory on Cable Fault Location}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {11-19}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.130258}, abstract = {One of the most commonly used equipment in the power system, which is exposed to various types of faults for various reasons, is high and low voltage pressure cables. Due to the fact that cables, either power or distribution cables are mostly transported from underground, despite their further reliability in airway, they are more difficult to repair and possibly replace in case of fault, in line with this the correct fault detection and location of them is of utmost important. In this paper, as is clear from the title of the research, the Fourier transform and Modal transform methods are used to find the type and location of faults, so that the efficiency of the selected method for detecting and locating the faults in underground transmission cables is examined and the speed and accuracy of finding a solution to the problem is assessed. In this paper, it is expected that the Fourier transform method, followed by the Modal transform has substantial speed and accuracy in determining the type and location of the faults. Meanwhile, the detection and location indicators are used to determine the type and location of the fault, which as shown in the simulations, will have efficient performance. The sample model is simulated to demonstrate the correctness of these methods. The simulation results from MATLAB and EMTP/ATP software confirm the precise and rapid performance of the proposed method.}, keywords = {fault detection and localization indicators,power cables,short circuit fault,Fourier Transform,Clarke transform,Modal components}, url = {https://ejst.samipubco.com/article_130258.html}, eprint = {https://ejst.samipubco.com/article_130258_1840c839cbaf02f83b2506dd4146d7fa.pdf} } @article { author = {Brindred, Sergey and Akhtarian Zand, Minoo}, title = {Estimation of Sensor Bias Fault in Adaptive Control of Power System}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {20-27}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.130259}, abstract = {Based on the simulation results, steady-state tracking faults are improved. Control of indeterminate systems, despite the actuator and sensor bias, has been and remains a major challenge. Sensor fault can cause process fault. Among the cases where sensor bias is common, air velocity measurements and gyroscope rates can be mentioned. Although considerable research efforts have previously focused on adapting the fault, the bias correction of the sensor appears to be relatively limited. However, the cause of several crashes was the sensor fault (due to radio altimeter fault, angle of attack sensor fault, airspeed speed sensor fault). Also, finding a way to fix the sensor bias problem is of the utmost importance. The direct model reference adaptive control (MRAC) method is used to control uncertain systems using controllers that are adapted to achieve a performance close to a reference model. However, these controllers maintain system stability and provide close tracking of the reference model response. In this paper, we intend to address the problem of unknown fault bias matching by adjusting the direct reference model adaptive control for state-feedback for state-tracking (SFST). Also, to obtain an asymptotic stable bias fault estimator, we use the Kalman filter to estimate the bias sensor fault. Based on the simulation results, steady-state tracking faults are improved.}, keywords = {Model Reference Adaptive Control,Sensor Bias,Kalman Filter,fault estimation}, url = {https://ejst.samipubco.com/article_130259.html}, eprint = {https://ejst.samipubco.com/article_130259_b5690edb17e119c5d90184ee3a0664af.pdf} } @article { author = {Ahmadpour, Amin and Bozorgian, Alireza}, title = {Manufacture of Modified Protective Coating Derived from Coal Industry}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {28-36}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.284979.1013}, abstract = {In this work, coal residue (pitch) was used to produce an inexpensive protective coating. The residue is primarily rehabitated for just to be suitable for use as a coating material (reference coat) by dissolving it in benzene in a ratio of Pitch/Solvent (P/S) = 3:1 by weight. The reference coating was then mixed with polyurethane (commercial type) in percentages ranging from 5 to 15 % by weight of the solid tar pitch. Well mature mortar cubes (7x7x7cm) with a (w/c =0.4) and sand-cement (s/c= 2.75) were cast and covered with the prepared coatings. The cubes were then soaked individually in tap water, MgCl2-5% conc. and H2SO4- 3.0% conc. for different periods of time. The last two reagents represent sea water and 5 years complete immersion in sewage water respectively. The effect of reagents on the compressive strength, water retention and weight was measured for the cubes. The results revealed that, all prepared coatings gave satisfied physical characteristics. Addition of PUR up to 10% by weight of coal residue produced coating materials with the most favorable physical and chemical behavior.}, keywords = {Pitch,coating,Sea water,Mortar}, url = {https://ejst.samipubco.com/article_130453.html}, eprint = {https://ejst.samipubco.com/article_130453_8cbdfdb6066ba5c866825a9e27807801.pdf} } @article { author = {Amouzad Mahdiraji, Ebadollah}, title = {Improving the Transient Stability of a Synchronous Generator by Using Braking Resistance to Increase the Critical Clearing Fault Time}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {37-45}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.285385.1019}, abstract = {In general, the stability of the power system can be considered a feature of the system that enables it to remain in equilibrium under normal conditions and regain a different acceptable state if affected by disturbance. Instability in a power system may take many forms, depending on the composition of the system and its operating modes. In order to evaluate the proposed method in damping transient fluctuations and network stability, a study has been carried out on a typical network. Since the topic of the article is in the field of transient stability, in part of the paper, braking resistance modeling in transient stability studies has been investigated. In the section on brake resistor control, brake resistor control is introduced by a switched Thyristor, using the trapezoidal method. Finally, the simulation results of the studied network are presented with the presence of TCBR and its capability of damping in the desired network.}, keywords = {Critical Clearing Time,transient stability,Oscillation Damping,Dynamic Brake Resistance}, url = {https://ejst.samipubco.com/article_130471.html}, eprint = {https://ejst.samipubco.com/article_130471_e1d6b98ce6299063874bd48d973f75c7.pdf} } @article { author = {Shiri, Negin and Malmal, Kamal}, title = {Time-Based Development Plans on a 17-Bus Radial Distribution Network with Genetic Enhanced Algorithm}, journal = {Eurasian Journal of Science and Technology}, volume = {1}, number = {1}, pages = {46-53}, year = {2021}, publisher = {Sami Publishing Company}, issn = {2783-3135}, eissn = {2783-3135}, doi = {10.48309/ejst.2021.284437.1012}, abstract = {In this paper, a time-based model for distribution network development planning is proposed, considering the possibility of using distributed electricity generation technologies and the existence of capacitor banks. The proposed model specifies the location, capacity, and timing of the use of distributed generation technologies and capacitor banks as well as the schedule for increasing the capacity of the grid lines. The Genetic Enhanced Algorithm is used to solve the stated problem to optimize the network development plan including the time, location and capacity of DG and capacitor banks in the distribution network as well as to optimize the investment cost and operating cost. It was also implemented in a MATLAB programming environment to validate and evaluate the effectiveness of the proposed solution to the problem of distribution network development planning on a 17-bus radial distribution network.}, keywords = {Development of Distribution Networks,Distributed Generation Resources,Capacitor bank,Genetic Algorithm}, url = {https://ejst.samipubco.com/article_130472.html}, eprint = {https://ejst.samipubco.com/article_130472_e325e06946114e3d109bb3034dad72b7.pdf} }